Energy Saving Switch and Touch Switch Panel

 

 

Wireless vs. Wired keys

We provide you Wireless Hotels panel switches Technology as alternative to wired connectivity and its complexities and its large cost.
The most important advantages of using wireless system:
 
1. Ability installation as a further development of hotels, which is using classic switches without having any extras.
2. No need to install Data cables.
3. Ease of installation and maintenance.
4. Acronym implementation time.
To understand this we will give an example of the proportion of savings when installing the door Signage panel outside of hotel room with the bell and control:
We will need three paire 1 mm diameter for each order, And we will need a pair for the bell these cables will need to Pipe to pass the cables by. 
If assuming that the length of the cable is 8 meters with wasting 2 meters while the price of $ 0.25 per square meter of installation per pair the  cost (2 + 8) * 40 * 0.25 = 10usd.
Pipe a value add to them to suppose that the price of $ 0.15 per square meter and that means 1.5usd.
Suppose pipe and cable installation fees is 12usd
The implementation of this work will take a total of 6 hours at least and the room rent dollars 50 only means a loss of potential profit amounting 24/50 * 6 = $ 12.5.

The total savings is 10+1.5+12+30+12.5=66USD for each Room, add to that the fault rate was lower and maintenance easier.

1- Energy saver switch for the hotels with RFID card technology.

The power will turn on when the guest put the RFID card in the switch "if the guest use any non RFID card the power will stay off", when the gust remove the RFID card the power will stay on for 30 sec. then turn off.

- Back box Size:86mm*86mm.
- AC 100V-150V,180V/250V.
- Max. Current 30A "40A are Optional, Can support with EXTCU to get more then 40A.
 

Doorbell & Signage

Doorbell & Signage come in two options:

A-Wireless.

B-Wired.

There is 2 options with the following specifications:
1- Acrylic Touch panel switch with built in controller and electric unit, easy to use easy to install no need any extra unit .
2- Out-room station had 3 LED signage & 1 doorbell switch.
3- In-room station had 3 switches, DSO-ES30 has 30A saving energy switch in same unit.
4- For customizations choice (  can add  add 2, 3, 4, 6 switches and A/C controller. 
 

Bedside Console

Bedside Console come in two options:
A-Wireless.
B-Wired.
There is 2 options with the following specifications:
1- Acrylic Touch panel switch with built in controller and electric unit, easy to use easy to install no need any extra unit .
2- All models come with Master switch and the rest is optional.
3- For customizations choice can add switches for open and close the curtains, Dimmer to dim the light or shine, also can add A/C control unit, Can add 6 switches, 1 Master, 1 Dimmer, 1 curtains and the A/C controller.
4- For customizations choice can add the Signage switches to Bedside Console.
5- With the wired and wireless options you can use up to 16 switches to control with same unit.
 

INTERACTIVE FLASH DEMO ABOUT THIS SYSTEM PRESS HERE


For more information please press on the picture below
 
 
Page visits: 11514